Shore bases

Discover the age-old techniques of painting...

Moderators: Layne, xFallenx, cultofkhaine

Forum rules
Remember that picture file size should be no larger than 256KB.
For the full Painting and Modelling rules, visit [url]http://www.druchii.net/phpBB3/viewtopic.php?f=9&t=27440[/url]
Post Reply
User avatar
Nargoth
Warrior
Posts: 55
Joined: Mon Oct 27, 2008 10:19 pm
Location: Sweden

Shore bases

Post by Nargoth »

Hi!

I am at the moment planing on a corsair army where the bases will resemble a shoreline where they just landed for the current raid. And since i haven't found any pictures here i decided to asking.
Is there anything you can use which looks like miniature seaweed? or am i hoping for to much there, And is there any where you can get like really small shells or such?. and finally how do you get that really white look of a nice beach since i don't really think desert yellow does it

any advice would be welcome :)
User avatar
Borog
Beastmaster
Posts: 357
Joined: Mon Nov 17, 2008 11:19 am
Location: Oslo, Norway

Post by Borog »

Maybe the first base kan be on land, the next halway into the water, and the last rank wading? Just the first thing that sprung to my mind :)

It should be possible to find some very fine sand to flock with? Then you don't need to paint it!
User avatar
Blaznak
Beastmaster
Posts: 379
Joined: Mon Sep 11, 2006 1:51 am
Location: Minnesota
Contact:

Post by Blaznak »

Yep, like Borog said.
Also, craggy bits of flint/shale jutting out with water effects on the back side only.
User avatar
Sarcon
Beastmaster
Posts: 387
Joined: Mon May 26, 2008 10:07 am
Location: Rotterdam, The Netherlands

Post by Sarcon »

At pet shops you can buy really fine sand with pieces of shells in there, for aquariums and such. Would be a good beach look IMO. Drybrush it in a proper light colour, have some pieces of drift wood, maybe even fish, or something else seeish, and you'd be all set
Be sure to check out my Army blog.
User avatar
Nargoth
Warrior
Posts: 55
Joined: Mon Oct 27, 2008 10:19 pm
Location: Sweden

Post by Nargoth »

That sounds great have to check my local pet store tomorrow then:)... the water part was great. I think i will make it so that the last rank is just about to step out of the water... since it would be difficult to make water up to there knees, and if i cut there legs of at the knee they would probably look to short.
Bitterman
Beastmaster
Posts: 319
Joined: Mon Apr 19, 2010 9:08 pm

Post by Bitterman »

Nargoth wrote:That sounds great have to check my local pet store tomorrow then:)... the water part was great. I think i will make it so that the last rank is just about to step out of the water... since it would be difficult to make water up to there knees, and if i cut there legs of at the knee they would probably look to short.


You can actually cut the top off the base (leaving just the sides) and have the model wading below the surface of the base. An example here, though that's for a much larger base than a 20x20mm Corsair bases.
User avatar
Pete-h
Executioner
Posts: 161
Joined: Fri Oct 17, 2003 9:50 am

Post by Pete-h »

I did something similar a while back with my front rank of corsairs. I used cork rocks and green stuff for the waves.

http://www.druchii.net/album_page.php?pic_id=2524

http://www.druchii.net/album_page.php?pic_id=3151

http://www.druchii.net/album_page.php?pic_id=2897

Looking back though now I'd be more tempted to use some water effects rather than the green stuff.
Post Reply